Release of the first in a series of "Standard" design propellers

Just a quick note, with little fanfare, that I've made a few propellers designs I've generated available for free download. They are STLs and can be 3D printed. You can find them in the Products section.

Comments

2

In what orientation should the propellers be printed? Strait up? Or flat?

DO NOT PRINT THIS STRAIGHT UP. EVER. The blades must be parallel with the build plate. I recommending having the shaft hole facing you rather than the ceiling to reduce the amount of support material. Print with 100% infill or 20+ perimeters.

Add new comment

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allows breaking the content into pages by manually inserting <!--pagebreak--> placeholder or automatic page break by character or word limit, it depends on your settings below. Note: this will work only for CCK fields except for comment entity CCK fields.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Target Image