Preparing for multi-material printing

After my last blog post, a reader has supplied me with a few rolls of HIPS to help support my work. This will help keep the multi-stage axial compressor work moving forward. I need to use dissolvable HIPS support in order to 3D print it. So in preparation, I started 3D printing a multi-color "calibration" cube in PLA in 2 colours. I've been refining my Slic3r settings and preventing oozing. Check out the results I'm getting now.

Add new comment

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allows breaking the content into pages by manually inserting <!--pagebreak--> placeholder or automatic page break by character or word limit, it depends on your settings below. Note: this will work only for CCK fields except for comment entity CCK fields.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Target Image